Loading... Please wait...

Our Newsletter


OS FS120SE Surpass Ringed 4-Stroke w/o Pump

  • Image 1
Price:
$414.99
SKU:
OSMG0930
Brand:
Shipping:
Free Shipping
Quantity:


Product Description

This is one of the O.S. Surpass series of 4-stroke model engines.
The Surpass series is the 2nd series of 4-stroke engines (The 1st series was
the FS series, discontinued and replaced by the Surpass series around 1986-7).
"Surpass" refers to the fact that this series gained 30% more power than the
previous FS series.

FEATURES: 30% larger Intake Valves than the FS series
Ringed Piston
Rear-mounted updraft Carburetor
Helix Gear-Driven Camshaft
Ball Bearing-Supported Camshaft and Crankshaft
Covered under 2-YEAR WARRANTY


INCLUDES: One Assembled FS-120 Surpass w/Carb and No Pump
One #F Glow Plug
One Exhaust Header
One Exhaust Muffler
One Choke Valve Extension
One Set of Instructions, Poster, and Decals
(Wrenches, Choke Valve Extension, and Mounting Template Are No
Longer Included per O.S.)


REQUIRES: Fuel: 5%-15% nitromethane with 18% lubricant. Synthetic, castor, or
a synthetic/castor blend may be used.
NOTE: Certain four-cycle fuels cannot be used due to low oil content.
However, SOME four-cycle fuels such as the Wildcat 4-Cycle 15%
(CATP9109) may be used because it has 18% oil content.
When choosing fuels for this engine, the modeler must be sure to
select a fuel with at least an 18% lubricant content.
Starting and Field Equipment
Propeller (see SPECS)


SPECS: Bore: 31mm (1.22")
Stroke: 27.5mm (1.08")
Power Output: 1.9 PS, 1.87HP at 11,000 RPM
Weight-Without Muffler: 30.5oz (864g)
Weight-With Muffler: 33.3oz (944g)
Practical RPM Range: 2,000 - 11,000 RPM
Crankshaft Thread Size: 5/16-24
Valve Clearance: Between .04mm and .1mm (or between .0015" and .004",
measured between the valve tip and rocker arm)
Length: 104mm (4.09") from backplate to the front of drive washer
Width: 47mm (1.85") width of engine neglecting the mounting flanges
58mm (2.28") distance between the mounting hole centers
Height: 138.5mm (5.45")
Suggested Prop(s): 13x11, 13x12, 14x10, 14x11, 15x8, 16x6, 16x7, 17x6
Construction: Aluminum and Aluminum alloys


Needle Settings: High Speed: 2.5 - 3 turns out from fully closed
Low Speed: Edge of larger sleeve centered, looking
down the neck of the carb


COMMENTS: Some differences between 4-Stroke and 2-Stroke engines.
4-strokes are quieter.
4-strokes get better fuel economy.
2-strokes generate more RPM (11,000-13,000 RPM with prop
while 4-strokes rev to around 9,500 RPM)
4-strokes generate much more torque and will swing a larger prop.
4-strokes have a realistic sound, like a real aircraft engine.


Find Similar Products by Category


Add to Wish List

Click the button below to add the OS FS120SE Surpass Ringed 4-Stroke w/o Pump to your wish list.

You Recently Viewed...